One of our specialties at LCI is LED Lit Light Boxes & Push Through Letters & Logos.  Here is a set of signs used as store & trade show props. The first image is of a Push through logo sign. The thick white acrylic letters are not only inlayed into the black acrylic face, but they actually protrude about 1/2″ proud.

One of our specialties at LCI is LED Lit Light Boxes & Push Through Letters & Logos.  Here is a set of signs used as store & trade show props. The first image is of a Push through logo sign. The thick white acrylic letters are not only inlayed into the black acrylic face, but they actually protrude about 1/2″ proud.

This plexiglass logo sign is made from 1/2″ & 1/4″ Acrylic. The logo layer is made out of 1/2″ Black Acrylic with a custom PMS color match top layer of 1/8″ acrylic. The logo is then adhered to a 1/4″ clear acrylic panel, which sits off the wall with stainless steel standoffs. We can help transform your logo into wall art that will be the center piece of your entrance, office or showroom. Our design can custom color match any Pantone color or we can even print the faces with smooth and lush gradient fills.

This Notre Dame Wall Mural Wood Engraving is nearly 50″ in diameter! At LCI we specialize in large format wood engraving. Our maximum laser bed size is 50″ x 100″ for engraving some of the largest projects and we can also tile engravings if you need something bigger made. Wether we supply the wood or if you have your own panels or wall cladding, we have the solution for your project.

UV Flatbed Printing Direct on Acrylic is a specialty that we excel in. Image Quality & Accurate Color is what we do best with our in-house flatbed printers. With our proprietary line of inks, we achieve maximum adhesion, durability and color stability when printing on the toughest substrates. We don’t need to use specialty “printer ready” acrylics which cost about 35% higher than standard stock, saving you money. Sheet size capability is oversized 48″ x 96″ Color capability is CMYK+White+Varnish

Our new Custom Super Bright Laser Engraved Acrylic LED Sign Panels are an exclusive product to LCI. We engrave your custom logo, graphics or copy on the 2nd surface (back side) of the acrylic. All LED lights and connections are contained within a 1/2″ thick piece of acrylic! No more channels or bulky frames to hide the lighting and electronics. Just simply connect the supplied mini power supply to the power jack on the back. These panels can be hung or they can be wall mounted with stand offs. All trademarks shown are the property of their respective owners.

This project was for CNC Routed Laminated Wood Letters. This set was routed to our client’s choice of laminated plywood and also their choice of stain. The backs of the letters were then drilled and tapped to accept aluminum standoffs for installation. LCI provides a template with all of the hole locations for easy layout the sign. The customer can then drill the wall and fill the holes with silicone. Push the letters in and it’s done!

At LCI we specialize in LED Halo Channel Letters. This example has a 1″ thick base layer laser cut from HDU; This is a material otherwise known as Sign Foam. The top layer is made from 1/4″ Thick White Acrylic to give a glossy finished look. The back of the sign is wired with bright LED’s that can be programmed for a variety of color glow. A transformer is also supplied to make this unit plug and play. At LCI, we can drill and tap the back of the logo sign for threaded standoffs. Then we supply you with a mounting template for fast and easy, do-it-yourself installation. Custom Acrylic and base layer color is available.

At LCI we specialize in laser cut Mylar stencils. Mylar is otherwise know as polyester film. This material is widely used for stencils because it is so easy to clean and stencil with. Mylar can be cleaned with most solvents and it can be reused many times for a stencil that will last for years. You can spray or brush paint on to achieve a crisp image. Whether you are needing an industrial stencil or a decorative pattern, LCI can help you manipulate your artwork or text to create bridges. These are important to help keep the centers of letters or other shapes in tact.

This plexiglass logo sign is made from 1/2″ & 1/4″ Acrylic. The logo layer is made out of 1/2″ Black Acrylic with a custom PMS color match top layer of 1/8″ acrylic. The logo is then adhered to a 1/4″ clear acrylic panel, which sits off the wall with stainless steel standoffs. We can help transform your logo into wall art that will be the center piece of your entrance, office or showroom. Our design can custom color match any Pantone color or we can even print the faces with smooth and lush gradient fills.

At LCI we specialize in LED Halo Logo Signs. This example has a 1″ thick base layer laser cut from HDU; This is a material otherwise known as Sign Foam. The top layer is made from 1/4″ Thick White Acrylic to give a glossy finished look. The back of the sign is wired with bright LED’s that can be programmed for a variety of color glow. A transformer is also supplied to make this unit plug and play. At LCI, we can drill and tap the back of the logo sign for threaded standoffs. Then we supply you with a mounting template for fast and easy, do-it-yourself installation. Custom Acrylic and base layer color is available.

These letters are laser cut from 1/2″ Sign Foam and painted to match customer’s wall color. We supplied the customer with a custom stencil made from 10 mil polyester film to help position the letters for installation. The letters can then be adhered to the wall with ordinary construction adhesive.

This plexiglass letter sign is made from 1/2″ & 1/4″ Black Acrylic Letters which are adhered to the Plex background panel with double sided adhesive. The letter faces are made from brushed silver laminate. Then the sign was mounted to the wall with standoffs.

An example of a Push Through Letter Tradeshow Display. This sign is made from 3/4″ Thick Acrylic Letters with a custom blue surface laminate. The letters “push through” the 1/4″ background panel and are 1/2″ proud of the surface. Finally LED lighting inside the display lights the edges of the logo to make it glow.

This is an example of a Laser Cut and Laser Engraved Acrylic Plaque.  There’s nothing like the clean look of laser engraved cast acrylic plaques. Perfect for just about any event or application.

This is an example of a Laser Engraved Wood Sign. We laser engrave maximum panel sizes up to 50″ x 100″  If you need a custom color engraving we can mask and spray the copy.

This is an example of a Push Through Letters Store Fixture Header. These headers are made from 1/2″ clear acrylic with a Kydex laminate. The Kydex is laser cut to allow for 1/4″ translucent acrylic letters to push through.

An example of a wide format print on Sintra (expanded PVC) and laser cut to custom contour (click here to read more…)